"This Just In"




MDIFW
Proposes Changes to Recreational and Commercial Smelt Management
By
Jim
Pellerin, Assistant Regional Fisheries Biologist and Smelt Species
Coordinator
Staff
biologists at the Maine Department of Inland Fisheries and Wildlife
(MDIFW) have been reviewing and discussing a series of changes to inland
smelt management to provide better conservation of this valuable natural
resource. The proposals include a variety of regulation modifications,
an inventory (population) review, as well as, a few experimental and educational components. For those unfamiliar with
smelt, many would be surprised that such a
small fish could possibly generate so much discussion and controversy. Consequently, it is important to
have a basic understanding of the species,
why they are important, and to whom before discussing the proposals.
What
are smelt?
Rainbow
smelt are a small, slender fish that generally do not exceed 6-7
inches in freshwater habitats. Their backs are a dark-green to olive
color, while their bright silvery sides shimmer
with iridescent hues of purple,
blue, green, and pink. Hence, the common name "rainbow" smelt.
Smelt
are an anadromous fish species that is; they grow to maturity in the ocean
and return to freshwater streams to spawn. The species is distributed
along the Atlantic seaboard from Labrador to
Smelt
are currently widely distributed throughout
Mature
smelt, 2-3 years of age or older, generally ascend streams to spawn
around the time of ice-out (March-May). However, it is well documented
that some populations spawn successfully within lakes and ponds that
lack suitable spawning tributaries by utilizing shoreline areas or offshore
shoals. There is also evidence suggesting smelt may choose to spawn
within the lake environment as a result of inclement weather or unfavorable
stream flows. The spawning event ranges from 2 days to 3 weeks, but
peak activity is usually less than one week in duration. Spawning activity
usually occurs at night with most of the spawning individuals dropping
back into the lake during daylight hours. Larger individuals of the
population spawn first, followed by smaller individuals in the latter part
of the run. Spawning fish travel a short distance upstream and position
themselves within the current over shallow riffle areas. Two or more
adult males will crowd around a female, and as more and more of these small
breeding groups develop, females will begin extruding small clusters of
eggs with males excreting milt simultaneously. The eggs are adhesive and
quickly attach to whatever they contact (i.e. rocks, vegetation).
The outer coating of the egg peels off to
form a stalk, which allows the egg to sway within
the current. Egg
development proceeds rapidly, and hatching generally occurs
within 2-4 weeks, depending upon water temperatures. After hatching,
the transparent larvae, approximately a quarter
of an inch in length, drift downstream
into the lake. Initially, smelt movement is largely restricted to
drifting with existing currents, which temporarily makes them a component
of the lake's plankton community. Growth is
fairly rapid, and they can obtain lengths
of up to 2 inches by late summer of their first year. Smelt
vary in size from water to water, but most mature
individuals from landlocked populations
range from 3-6 inches in length. Smelt from large lake
systems (i.e.
Smelt
are considered to be a schooling species that exhibits nocturnal
behavioral patterns. In the summer, they generally tend to congregate
in large, tight schools near the bottom of the lake throughout daylight.
However, as night approaches they swim towards the thermo cline to feed,
and individual smelt fan out to form large, loose schools. The thermocline
is a band of water that exhibits rapid temperature change and
generally
occurs at a depth of around 15-30 feet. Smelt movements and daily patterns
appear to be more variable during the fall and winter seasons, when they
are known to utilize the entire lake environment.
Why
are smelt important and to whom?
Despite
their relatively small size and low profile, rainbow smelt are of great
importance to anglers and fisheries statewide. They are the only inland
fish species to provide such a variety of uses and benefits including:
recreational sport fishing opportunities, a commercial bait fishery,
a favored bait for anglers targeting other sport fish, a popular food
fish, and a primary forage fish. These same attributes contribute to
the complexity of smelt management, because
demands from various user groups are often
in conflict with one another, particularly when resources are limited.
For example, protecting smelt populations for one type of use (i.e.
forage) typically reduces or eliminates other use opportunities. Unpredictable
and extreme fluctuations in smelt abundance, combined with a lack
of knowledge and control over the factors influencing abundance further complicates
management of the species. All of these dynamics can be the source
of controversy among the various user groups and often creates dissatisfaction
towards the resource management agency. Smelt
are extremely valuable as a forage fish, and are a principal food source
for a variety of
What
changes are being proposed and why?
In
2001, the Maine Department of Inland Fisheries Wildlife (MDIFW) and various
public-working groups developed a 15-year species plan for smelt management.
The goals, objectives, and priorities of the species plan are identified
below. One
goal was to maintain existing smelt habitat quantity and quality;
and increase smelt abundance and availability where it was possible to
moderate current demands as a forage fish, as a sportfish, and as a commercial
baitfish. We
also wanted to, on a statewide basis; maintain smelt populations at
or above current abundance levels in 558
*
Maintain existing system of listing waters open to commercial smelting.
MDIFW
distributes a list of waters open to commercial smelt dealers, which
is reviewed and updated annually. This list allows the Department to
efficiently respond to and manage for rapid
changes in our smelt populations by
removing and/or adding waters as needed.
*
Conduct a comprehensive review of statewide smelt waters. The
Department's fisheries staff recently completed a comprehensive review
of all known smelt waters to insure consistency with the management
priorities
of the species plan. The assessment also allowed the Department to
identify and consider potential new opportunities for both recreational and
commercial user groups. As a result, eleven waters will be removed from
the 2005 commercial smelt list. On the
other hand, sixty smelt waters were
*
Hook & line anglers/dip-netters (without a commercial license) will only
be allowed to keep 5-dozen smelt alive; the balance of their limit would
have to be killed. The
illegal sale of live smelt for bait by recreational anglers has been
a problem in some areas of the State, and is a source of controversy among
recreational and commercial users. This rule change discourages this
practice by lowering the economic incentive, and
it allows the Warden Service to more
effectively enforce existing laws pertaining to the illegal sale
of smelts. In addition, recreational anglers are still permitted a reasonable
number of live smelt for their personal bait needs.
*
Establish a 24-inch diameter maximum hoop size for dip-nets. Larger
nets are more effective at capturing smelt, and in many instances a few people with hefty nets stationed at the mouth of a small stream
can effectively block and control the entire smelt run. This change
provides additional opportunity for escapement
and better distributes the catch among
anglers, particularly on small to medium sized streams.
*
Establish a statewide midnight closure for dip-netting. This
proposal has three benefits: (1) it is expected to significantly
protect the resource by giving smelt an opportunity to spawn a portion
of each night without interference or harvest; (2) it should reduce some
of the social issues associated with dipping, particularly in the wee hours
of the morning. Aggregations of smelt-dippers crowding into small areas
along streams are highly visible to the public and landowners. Trespass, littering, general
land abuse, and disturbing noises or behaviors are
often associated with dipping activities; and (3) it also provides some
enforcement benefits for the Warden Service.
*
Smelt dealers only allowed to dip-net 2 quarts of smelt during the spring
spawning season. Currently, on commercial
waters dealers are allowed to harvest 8 quarts
of smelt all winter long with the use of dropnets, and they can then dip
8 quarts of smelt during the spring spawning run. The new regulation will
reduce the spring harvest. In addition, it improves equity and levels
the playing field among recreational and
commercial user groups on waters open to
commercial dealers. For example, on many waters a commercial dealer
can dip 8 quarts, while a recreational dipper
standing next to the commercial
dealer can only dip 2 quarts.
*
Require smelt dealers to use commercially manufactured graders. A
grader is a passive sorting device that allows smaller fish to escape,
which in the case of smelt are very fragile and not of suitable bait size,
while retaining larger individuals. Currently, commercial dealers are
required to use graders; however, many dealers
are using "home-made” graders, which are ineffective and result in
excessive and unnecessary mortality to
juvenile smelt with no market value.
*
Commercial anglers will be required to report smelt catch information
to MDIFW. Although this type of data
is not always accurate, it provides a good
tracking tool for monitoring fishery changes over time that would allow MDIFW
to better manage and understand our commercial smelt fisheries.
*
Educate and encourage dip-netters to avoid walking on smelt eggs during
the spawning season. Spawning
is a critical life stage of any species, and dip-netting activity
has been shown to cause high egg mortality due physical damage and/or
siltation. Increasing the awareness of this issue through education is a
low cost technique that may ultimately improve survival.
*
Investigate the feasibility of requiring graders/grader panels installed
in the bottom of commercial drop nets. Existing
grading systems require smelt to be removed from the source water
and exposed to cold air temperatures. Juvenile smelt are extremely fragile,
excessive and improper handling, as well as, exposure to extreme temperatures
results in high mortality. A built-in grading system would allow
young smelt to escape without handling or removal from the water. MDIFW
hopes to partner with a commercial smelt dealer for this experimental project.
*
MDIFW pathologist to investigate causes of commercial/retail smelt mortalities.
Numerous
smelt are lost during handling and transport, and substantial
mortalities occur in wholesale and retail holding facilities. Dew’s
pathologist will investigate these losses and develop a resource guide
for handling, transporting, and holding smelt to reduce mortality. To
date, we have presented the above proposals to the Commissioner’s Office,
the Fish and Wildlife Advisory Council, the Smelt
Working Group, and a number of commercial
smelt dealers with encouraging results. Based on this process,
we have already made modifications to the list of commercial smelt waters
for the 2005 season. Over the next few months we hope to solicit additional
input on these proposals from the general public. If our readership
has any comments or concerns regarding the proposed changes then please feel free to contact Jim Pellerin at the Gray Regional Office.
From
the
With
Christmas coming only a few days away, many
Wishing
you safe and happy holidays!
Colonel
Thomas A. Santaguida
Chief,
Maine Warden Service
|
President's News Letter Photo's Member Services Links News & Information Association Bylaws Meeting Minutes Membership Form Contact Information "This Just In" |